GMT+8 · Reply within 12 hours
Haoze logo Shandong Haoze Suspension PVC Resin
Get a Quote
Trade2026-11-166 min read

Pakistan Sets Final Duties on U.S. and Indonesian PVC Resin

The 8 November 2026 NTC ruling sets four rates of 17.70 to 37.30 percent, effective 23 July, on a heading shared with a separate China-origin measure.

阅读中文版 →

Читать на русском →

Pakistan's National Tariff Commission signed a final determination on 8 November 2026 that imposes definitive anti-dumping duties of 17.70 to 37.30 percent on suspension-grade PVC resin originating in or exported from the United States and Indonesia. The notice, case A.D.C. No. 71/2026/NTC/PVC, sets the duties for five years with effect from 23 July 2026, the date of the preliminary determination. Chinese-origin resin falls outside this case; a separate sunset-review measure under the same customs heading has covered that origin since 8 June 2025.

The notice was posted on the Commission website on 11 November 2026, three days after signature.

1. The 8 November determination

The final notice names the investigated product as PVC resin of suspension grade, classified under Pakistan Customs Tariff code 3904.1090. The Commission listed its uses as pipes and fittings, garden hose, shoes, cables, films and sheets, compounding and packaging. The period of investigation ran from 1 January to 31 December 2025 for dumping and from 1 January 2023 to 31 December 2025 for injury.

Section 50(1) of the Anti-Dumping Duties Act, 2015 provides the authority for the levy. Section 50(2) applies the lesser-duty rule where the injury margin is lower than the dumping margin. The notice is signed by Muhammad Arshad, Secretary of the NTC, and published under Section 39 of the Act. A non-confidential version of the detailed report was issued under Rule 16 of the Anti-Dumping Duties Rules, 2022 and placed in the Commission public file.

Four rates apply. They are set out below against the exporter names recorded in the notice.

Origin Exporter or producer named Definitive duty Basis in the notice
United StatesWestlake Vinyls Company LP37.30%Individual dumping margin
United StatesWestlake Vinyls Inc.22.28%Individual dumping margin
United StatesAll other exporters and producers37.30%Residual at the highest US margin
IndonesiaAll exporters and producers17.70%Section 32, best available information

2. The April opening and the July provisional rate

The Commission opened the investigation on 17 April 2026 under Sections 23 and 24 of the Act and Rule 5 of the Anti-Dumping Duties Rules, 2022. The application came from Engro Polymer & Chemical Limited of Karachi, described in the notice as a producer of suspension-grade PVC resin. A preliminary determination under Section 37 followed on 23 July 2026.

The provisional duties ranged from 17.70 to 37.30 percent ad valorem and carried a stated validity of four months. The final determination kept both bounding figures and added an individual rate of 22.28 percent for one US company. The four-month window that opened in July closed before the November signature, so the notice states an effective date earlier than its own date of issue.

Date Step Rate or action Source
17 Apr 2026Investigation openedCase A.D.C. 71/2026/NTC/PVCNTC final notice
23 Jul 2026Preliminary determinationProvisional duties 17.70 to 37.30 percent, four monthsNTC final notice
8 Nov 2026Final determination signedFour definitive rates, five yearsNTC final notice
11 Nov 2026Notice posted on the NTC websitePDF made publicNTC website
23 Jul 2026Definitive duties take effectRetrospective to the preliminary dateNTC final notice

3. Where the four rates came from

Two US exporters, Westlake Vinyls Company LP and Westlake Vinyls Inc., supplied the data the Commission needed to calculate individual dumping margins. Their rates are 37.30 and 22.28 percent. For non-cooperating US exporters and producers, the Commission set the residual rate at the highest dumping margin calculated for a US exporter.

No Indonesian exporter or producer provided the requested information. The Commission therefore fixed the Indonesian margin under Section 32 of the Act on the basis of the best available information, and applied a single rate of 17.70 percent to all of them.

On injury, the Commission recorded an increase in the volume of dumped imports, price undercutting, price depression and price suppression, along with declining market share, profits and return on investment. It examined factors other than dumped imports under Section 18 of the Act and found a causal link between the dumped imports and the injury to the domestic industry.

PVC resin palletised on a warehouse floor
PVC resin palletised on a warehouse floor
Data supplied Method in the notice Rate
Two named US companiesIndividual dumping margin37.30% and 22.28%
Other US exportersResidual at the highest US margin37.30%
Indonesian exportersSection 32, best available information17.70%
Injury margin below dumping marginSection 50(2) lesser-duty ruleLower of the two

4. The July effective date and the November notice

The definitive duties run for five years from 23 July 2026, although the final determination was signed on 8 November 2026 and posted on 11 November. Ninety Two Chambers noted in its November 2026 reading of the notice that the effective date is the one stated in the final determination, and is separate from the later website publication date. Entries cleared between July and November therefore fall inside the definitive period.

Collection follows the Customs Act, 1969. The duties are levied in addition to other taxes and duties on the import. Section 51(1)(ea) of the Act withholds the duty on resin used as an input in goods destined solely for export, or in foreign grant-in-aid projects, where the import is covered by a customs-duty exemption scheme under that Customs Act. The exemption is conditional on the scheme and on the documented use of the resin.

Item on the entry file What it decides Source in the notice
PCT heading 3904.1090 on the customs declarationProduct scopeProduct under Investigation
Country of origin on the certificate of originWhether case ADC 71 appliesExporting Countries
Legal name of the exporter on the commercial invoiceWhich of the four rates appliesRate table
Date of entry for consumptionPosition against the 23 July 2026 effective dateSection 50
Customs exemption scheme referenceEligibility under Section 51(1)(ea)Exemption paragraph

5. The separate measure on Chinese-origin resin

Case A.D.C. 71/2026/NTC/PVC names only the United States and Indonesia. Resin originating in the Chinese mainland falls outside its scope. A second anti-dumping measure covers that origin under the same PCT heading 3904.1090.

The National Tariff Commission published the second sunset-review determination on 2 January 2026 as case ADC 50/2016/NTC/PVC/SR-II/2025, according to a digest issued by the Shandong Provincial Department of Commerce on 21 January 2026. The review kept duties on suspension-grade PVC resin from the Chinese mainland, South Korea, Thailand and Taiwan, China. The Chinese mainland rates stand at 3.44 to 20.47 percent. The measure took effect on 8 June 2025 and runs for three years.

The original investigation opened on 29 November 2016 and ended in an affirmative determination on 25 April 2018, with duties levied on the cost-and-freight value of the resin from 13 June 2017. That valuation basis belongs to the anti-dumping assessment of the older case. A first sunset review on 9 December 2023 continued the duties from 8 June 2022 for three years, and the second review opened on 2 June 2025. The Shandong digest records the same exclusion for resin used solely as an input for export goods and for foreign grant-in-aid projects.

Item Case ADC 71/2026 Case ADC 50/2016, second sunset review
Origins namedUnited States, IndonesiaChinese mainland, South Korea, Thailand, Taiwan, China
PCT heading3904.10903904.1090
Rates17.70 to 37.30 percentChinese mainland 3.44 to 20.47 percent
Effective date23 July 20268 June 2025
DurationFive yearsThree years
SourceNTC notice, 8 Nov 2026Shandong digest, 21 Jan 2026

The final notice sets no date for a review, an appeal or a sunset proceeding. The non-confidential final determination report sits in the Commission public file, and the notice names no further step in case A.D.C. 71/2026/NTC/PVC.

The measure applies to a product description, and that description is carried by the grade mark and the certificate. The bands behind the mark are set out on the PVC Resin SG-5 page and in the specification table.

Sources: NTC Notice of Final Determination, A.D.C. No. 71/2026/NTC/PVC, 8 November 2026 (PDF), Shandong Provincial Department of Commerce digest of the second sunset review, 21 January 2026, Ninety Two Chambers reading of the final notice, November 2026.

SG-5 for the next production run

The grade, the tonnage and the destination port produce a price, a specification sheet and the full document list, usually within 12 hours (GMT+8).

WhatsApp