GMT+8 · Reply within 12 hours
Haoze logo Shandong Haoze Suspension PVC Resin
Get a Quote
Sourcing2026-09-245 min read

Carbide-Based vs Ethylene-Based PVC Resin: What Differs

Same GB/T grade, same K-value, not interchangeable in every formulation. The gap sits in plasticiser absorption, whiteness and batch consistency.

阅读中文版 →

Читать на русском →

Two suppliers quote PVC resin SG-5, K-value 66–68, 25 kg bags, same Incoterm. One is carbide-based, one is ethylene-based. The certificates read alike, while the prices differ by a margin the certificates do not explain.

The gap sits behind that difference.

Both routes arrive at the same monomer and the same polymer, so both meet the same GB/T grade. What differs is trace chemistry and particle structure. Carbide-based resin generally offers higher plasticiser absorption and a cost advantage; ethylene-based resin generally offers better initial colour, thermal stability and batch consistency. For pipe and standard profiles the two are often interchangeable after a trial. For transparent sheet, film, cable and potable-water formulations, ethylene-based is the usual starting point unless testing proves otherwise.

Two routes, one molecule

Vinyl chloride monomer (VCM) is the feedstock for both. The fork in the road is how the VCM is made.

Carbide route: calcium carbide reacts with water to give acetylene, which is combined with hydrogen chloride to give VCM.

Ethylene route: ethylene is chlorinated to ethylene dichloride (EDC), which is cracked at high temperature to give VCM, with the by-product HCl recycled back into the chlorination step.

From the reactor onwards (suspension polymerisation in water, stripping, centrifugation, drying, sieving) the process is essentially the same. A certificate does not state which route the resin came from.

What the route actually changes in the resin

Four things reliably differ, and they all trace back to the monomer's purity and to how the polymer particles form.

Trace by-products. Acetylene-based VCM carries a different trace profile from ethylene-based VCM, including low-level acetylenic and other unsaturated species. The practical consequence is not that one is unsafe (both are stripped to the same residual VCM ceiling) but that trace species can act as sites for early degradation, which shows up in colour and thermal stability.

Particle morphology. Carbide-based resin particles tend to be more porous with a less pronounced skin, which is exactly why they absorb more plasticiser. Ethylene-based particles are typically denser and more uniform in distribution.

Initial colour and thermal stability. Whiteness after 10 minutes at 160 °C is a standard line on the certificate. Ethylene-based resin typically holds a higher initial whiteness and resists yellowing longer in processing. In a white profile, a light grey pipe, or any transparent part, that difference is visible.

Batch-to-batch consistency. Route, feedstock purity and plant configuration all feed into how tight the particle size distribution and the K-value actually sit inside the declared band. This is where the cheapest offer usually stops being cheap.

Where carbide-based wins

  • Cost. The route uses abundant domestic feedstock and is the reason China's suspension PVC price floor sits where it does.
  • Higher plasticiser absorption. For flexible and semi-rigid formulations, and for any compound carrying meaningful filler load, a more porous particle is a genuine advantage. The resin holds more plasticiser without sweating.
  • Pipes and standard profiles. For grey or dark-toned drainage pipe, conduit and standard profile where colour is not a selling point, the optical differences simply do not bind.
  • Foamed and filled products. Higher absorption and often lower apparent density support formulations built around filler and blowing agent.

Where ethylene-based wins

  • Transparency. Transparent sheet, clear film and clarity-sensitive parts. The difference shows up on the shelf.
  • Colour-critical products. White profiles, light-tone panels and anything where a shift in initial whiteness would be noticed by the end customer.
  • Potable-water and food-contact formulations. Formulations targeting those standards normally start from the higher-purity route and then qualify the additive package on top.
  • Cable insulation and sheathing. Dielectric performance is sensitive to ionic residues and to how clean the resin is to begin with.
  • Thin-wall and high-speed processing. More uniform particle size distribution means less variation in feed and less risk of surging on a high-output line.

The hard part: the grade number does not tell the route

SG-5 is SG-5 by specification. Carbide-based and ethylene-based resin both qualify, and a certificate built to GB/T 5761-2018 looks essentially the same for both. It lists the K-value, the viscosity number, the residual VCM and the sieve data, none of which is a route indicator.

So when the route bears on the product, it has to be established deliberately. Three signals carry the information a certificate leaves out: the written disclosure of route, plant and batch; the apparent density and plasticiser absorption, both of which track particle porosity (a resin at the high end of absorption and the low end of apparent density behaves like porous, carbide-route material); and the whiteness after 160 °C for 10 minutes, the closest the certificate comes to a thermal-stability signal. A sample run on the buyer's own compound still does not replace a certificate — fusion and colour checks belong on the line. Once a formulation is qualified on a specific route and plant, any change is a re-qualification, not a swap.

Practical decision table

Product Start from Why
Water supply pipe, pressure-ratedEither, trial firstStrength is driven by formulation and fusion
Drainage pipe, conduitCarbide-basedColour is not a constraint; cost is
White or light-tone window profileEthylene-based, or trial carbide carefullyInitial whiteness and UV-aged colour
Transparent sheet, clear filmEthylene-basedClarity and colour
Cable insulation and sheathingEthylene-basedDielectric cleanliness
Artificial leather, flexible filmCarbide-based, or ethylene with high absorptionPlasticiser loading
Injection-moulded fittingsEither; check flow and consistencyFlow is set by the K-value chosen
Heavily filled compoundCarbide-basedPlasticiser absorption per gram

De-risking the decision

The mistake is treating this as a purchasing question. It is a formulation question, and one afternoon answers it.

Buy a sample of each on the same grade and K-value. Run both through the same formulation on the same line. The comparison covers surface finish, output per hour, reject rate and the colour of the finished part. Then record which plant and which route the formulation was qualified on, and keep that next to the K-value in the purchasing file. That page is what keeps a "cheaper offer" from becoming a re-run.

Parallel quotes on both routes, same grade and K-value, let a buyer run the comparison directly.

Next: PVC Resin Grades Explained: SG-5 vs SG-3 vs SG-7 vs SG-8 for the full K-value chart and what each grade is bought for. The K-value and viscosity bands that both routes have to meet are on the specification table, and grade-by-grade end uses are in the grade guide.

Both routes are quoted against the same grade band: PVC Resin SG-5 (K 66-68).

SG-5 for the next production run

The grade, the tonnage and the destination port produce a price, a specification sheet and the full document list, usually within 12 hours (GMT+8).

WhatsApp